1. <li id="9pzss"><meter id="9pzss"></meter></li>
    <thead id="9pzss"></thead>

    1. <thead id="9pzss"></thead>

        超聲波探傷儀曲面?zhèn)阮^ 弧面探傷儀測試 弧面曲面斜探頭定做超聲波探傷儀曲面?zhèn)阮^ 弧面探傷儀測試 弧面曲面斜探頭定做

         產品介紹

        ———————————————————————————————————————————————————————————————————————————

        超聲波探傷斜探頭定做:曲面,弧面,凹面,凹弧面。適合超聲波探傷儀測試棒材,管材弧面焊縫損傷以及內部損傷,

         

        產品圖片

        ———————————————————————————————————————————————————————————————————————————

        曲面弧面斜探頭2曲面弧面斜探頭曲面弧面斜探頭1

         

        產品特點

        ———————————————————————————————————————————————————————————————————————————

        更好的對弧面進行耦合探傷,更能精準的判斷損傷

         

        技術參數

        ———————————————————————————————————————————————————————————————————————————

        超聲波探傷儀斜探頭

         

        符合標準

        ———————————————————————————————————————————————————————————————————————————

        實用各種品牌超聲波探傷儀

         

        產品配置

        ———————————————————————————————————————————————————————————————————————————

        定做產品需要1周時間左右,有什么疑問隨時聯系我們客服

        該公司產品分類: 進口設備 水深儀 多功能型粗糙度儀 經濟型粗糙儀 粗糙度儀 測厚儀儀器配件 涂層測厚儀 超聲波測厚儀 測厚儀儀器 硬度計配件 臺式硬度計 超聲波硬度計 便攜式硬度計 硬度計儀器 探傷儀配件類 磁粉探傷儀 鋼軌探傷儀 超聲波探傷儀 鋼絲繩探傷儀 探傷儀

        CTS-22模擬超聲波探傷儀

         超聲波探傷儀CTS-22是攜帶式A型脈沖反射式超聲波探傷儀,可用交流電或電池供電工作。儀器采用高亮度、內刻度矩形示波管,具有工作頻率寬、探傷靈敏度高、穩定性好、波形清晰和體積小、重量輕、耗電省以及操作方便等特點。

        超聲波探傷儀CTS-22儀器適用于金屬和部分非金屬材料的無損檢測,尤其適用于流動性大的野外或高空探傷作業,可作為無損檢測人員資格考核用標準化儀器。

        主要技術性能:

        工作頻率范圍

        0.5~10MHz

        衰減器

        80dB,每2dB±0.1dB

        垂直線性誤差

        ≤5%

        動態范圍

        ≥30dB

        掃描范圍(鋼縱波)

        10~5000mm

        水平線性誤差

        ≤1%

        最小探測距離

        ≤3mm(配用5N14窄脈沖探頭)

        遠場分辨率

        ≥30dB(配用2.5P20-D探頭)

        脈沖移位范圍(鋼縱波)

        0~400mm

        靈敏度余量

        ≥46dB(2.5P20-D直探頭發現200mm-ф2平底孔)

        重量

        主機4.5Kg,帶電池6.3Kg

        體積(長×寬×高)

        300mm×254mm×100mm

        儒佳檢測公司專門供應超聲波探傷儀CTS-22,歡迎咨詢 
        該公司產品分類: 其他理化檢測 氣體檢測儀 光譜儀 看譜鏡 顯微鏡 便攜式硬度計 X射線探傷附件 磁粉、滲透探傷耗材 超聲波試塊 X射線劑量檢測儀 工業X射線膠片 磁粉探傷儀 涂層測厚儀 超聲波測厚儀 磁粉探傷耗材 X射線探傷耗材 磁粉探傷機 X射線探傷機 超聲波探傷儀 超聲波側厚儀

        美國奧林巴斯Olympus EPOCH LTC數字超聲波探傷儀

        美國奧林巴斯Olympus EPOCH LTC數字超聲波探傷儀
        產品名稱:數字超聲波探傷儀
        規格型號:EPOCH  LTC
        品牌廠家:美國奧林巴斯Olympus
        美國奧林巴斯Olympus EPOCH LTC數字超聲波探傷儀產品簡介
        OCH LTC數字超聲探傷儀體現了當今最先進的技術。
        該儀器體積小而重量輕,僅重0.96 公斤(2.12 磅)。
        EPOCH LTC 的設計基于技術領先的EPOCH XT,其功能齊備,符合EN12668-1標準,不僅具有大量的標準性能,而且還配有多個專門的選項以滿足用戶的檢測需要。
        該儀器配有具有全VGA分辨率(640 x 480)的明亮彩色穿透反射式顯示屏,能夠以高分辨率顯示A掃描,并且在包括陽光直射的任何光線條件下,都能清晰顯示圖像。EPOCH LTC的設計符合IP67的要求,能確保儀器在無損探傷現場常見的惡劣環境下操作正常。
        美國奧林巴斯Olympus EPOCH LTC數字超聲波探傷儀產品特點
        密封外殼,符合IP67要求,可在惡劣環境下使用
        符合EN12668-1標準
        重量輕,僅為0.96 公斤(2.12 磅)
        全VGA多色彩穿透反射式顯示功能
        USB(OTG)端口,用于與計算機通訊以及直接打印
        袖珍SD存儲卡以及具有標準字母數字式數據電子自動記錄器的機載存儲器
        標準動態DAC/TVG曲線功能
        具有數字濾波器的數字高動態范圍接收器
        帶有調節選項的高性能方波脈沖發生器
        美國奧林巴斯Olympus EPOCH LTC數字超聲波探傷儀產品功能
        為滿足用戶檢測需要,EPOCH LTC 含有許多標準性能。其中包括方波脈沖發生器、動態DAC/TVG 曲線、可選數字式濾波器、0 dB到110 dB的增益范圍、峰值記憶、0.025毫米(0.001英寸)測量分辨率,以及一個帶有可編程報警的閘門。此外,儀器還提供許多特定應用的可選軟件功能:機載DGS/AVG、手動脈沖重復頻率(PRF) 控制、脈沖寬度調整、閘門2、曲面校正,以及為增強控制提高功效而配備的GageView Pro 軟件界面程序。
        具有PerfectSquare™技術的標準方波脈沖發生器
        標準數字式接收器濾波:寬帶和高通設置
        為滿足檢測需要可完全自定義的四個測量顯示??蔀槊總€顯示框自由選擇閘門測量。
        波幅測量分辨率為0.25%滿屏高。
        為厚度、聲程、斜深進行自動校準。
        從0%到110%滿屏高的波幅測量
        自動控制的PRF(10 Hz 到 500 Hz)??梢赃x擇手動控制。
        美國奧林巴斯Olympus EPOCH LTC數字超聲波探傷儀產品顯示模式:
        - 標準的1到10格
        - 聲程
        - 用于角度聲束檢測的跨度模式
        - 可選的100%或110%垂直顯示
        美國奧林巴斯Olympus EPOCH LTC數字超聲探傷儀產品環境能力:
        EPOCH LTC 能在包括海上與沙漠的各種嚴酷的現場工作環境中正常操作。
        其密封設計符合IP67要求。
        可在美軍標準MIL-STD-810F 程序1和國家防火協會規范NFPA 70E 500節 1級 2分段 D組中規定的爆炸氣體環境中應用。
        通過了IEC 60068-2-27,60 g,6 ms H.S.的防震測試,3軸,共18軸。
        通過了IEC 60068-2-6的振動(正弦振動)測試,0.03英寸DA為50 Hz 到150 Hz,或者2 g,20 個掃查周期。
        寬泛的工作溫度范圍:
        - 鋰離子電池:-10 °C 到 50 °C (14 °F 到 122 °F)
        - 電池存儲溫度:0 °C 到 50 °C (32 °F 到 122 °F)
        - 充電溫度:0 °C 到 40 °C (32 °F 到 104 °F)
        手腕帶可按左手或右手操作習慣安裝。
        密封電池盒,無需工具即可更換電池。
        USB(OTG)端口、袖珍SD卡插口以及VGA/RS-232接口都附有密封的輸入輸出保護裝置。
        美國奧林巴斯Olympus EPOCH LTC數字超聲探傷儀產品鍵盤設計:
        EPOCH LTC 具有簡化的小型鍵盤,通過用左手或右手敲擊鍵盤,可以直接使用儀器的主要功能,進行全面控制。 快速參數調整與迅速便捷的儀器設置文件檢索(CAL)。 具備英語、國際符號、日語及中文版本。 四個自定義功能鍵,可為儀器設置參數選擇預設數值。
         
        該公司產品分類: 拉拔儀 混凝土表面輪廓儀 扭力扳手 扭力螺絲刀(扭力批) 泵油 瀝青密度儀 金屬探測儀 低溫真空油脂 真空潤滑脂 混凝土探傷儀 聲級計 電子天平 離心機 工業管道內窺鏡 推拉力計 測振儀 氣象儀 涂布刮墨棒 剎車盤磨損測試儀 瓶壁測厚儀

        TUD201超聲波探傷儀

        TUD201超聲波探傷儀TUD201特征

          ·具有存儲功能,可以存儲100A掃圖形及參數和100組共10000個厚度值;  ·具有雙閘門設置和報警功能。能夠在屏幕上任意設置閘門的位置和寬度,有進波、 失波和自動三種報警方式;  ·可以在單探頭和雙探頭兩種探傷工作方式之間任意切換;  ·探頭阻尼通過菜單選擇在50150、400之間切換;  ·可以利用標準試塊手動或自動生成DAC曲線;  ·具有線性抑制功能,屏高的080%,步距:1%;  ·具有波形和探傷參數的凍結和解凍功能;  ·具有系統參數的加鎖/解鎖功能;  ·具有存儲圖形的回放功能,將已存儲的A掃圖形從存儲區取出并顯示在屏幕上;  ·具有刪除功能,將指定的內容(以存儲組號表示)從存儲區刪除;  ·具有打印功能,通過串行打印機打印厚度報告與波幅曲線;  ·可以進行屏幕硬拷貝,將當前屏幕上的圖形和菜單拷貝并打?。?/SPAN>  ·具有雙向RS232串口,即可將數據文件傳輸至PC機,也可用PC機下載數據至探傷設置參數,進行數據處理、保存、生成探傷報告等;  ·聲程測量;  ·顯示方式:EL高亮度圖形點陣顯示。

        TUD201超聲波探傷儀TUD201應用

        可以用于實驗室,也可以用于工程現場。廣泛應用在鍋爐、壓力容器、航天、航空、電力、石油、化工、海洋石油、管道、軍工、船舶制造、汽車、機械制造、冶金、金屬加工業、鋼結構、鐵路交通、核能電力、高校等行業。

         

        TUD201超聲波探傷儀TUD201技術參數

        技術指標  ·測量范圍(mm): 2.59999(鋼縱波)  ·工作頻率(MHz) 0.210(低頻0.21,中頻0.64,高頻110三檔可選)  ·增益調節:   110dB (0.2、0.5、1、2、612步距調節,0.0時鎖定)  ·垂直線性誤差: ≤3%  ·動態范圍:   ≥32dB  ·水平線性誤差: ≤0.2%  ·波形顯示:   正半波、負半波、全波和射頻  ·探傷靈敏度余量: > 50dB(2.5P20/200Ф2)  ·脈沖移位:    20+3400 us  ·探頭延時:    0us99.99us,分辨率0.01  ·掃描分辨率:   0.1mm (5100mm)1mm (1001000mm) ;            10mm (1000 9999mm)  ·聲速:      1000 m/s9999m/s  ·外形尺寸(mm):  230×184×53  ·重量 (含電池):  1.4 Kg

         

        標準配置  1.主機1  2.鋰電池1  3. 3A/9V電源適配器1  4.電源電纜1  5.LEMO探頭連電纜2  6.直探頭1  7.斜探頭1選配件  1.行式熱敏打印機(TPUP-NH)  2.串行通訊電纜  3.PC通訊軟件

        安徽超聲波探傷儀合肥焊縫探傷儀用于測量焊縫點內部是否有損傷等一系列焊接點測量儀器

        技術特點:最新推出的GH-6900是一種先進的數字式超聲探傷儀,符合JJG746-2004規程,彩色顯示,鮮明亮麗采用嵌入式計算機系統和超大規?,F(xiàn)場可編程集成電路設計,具有多顏色的TFT顯示和許多新特點,承襲和改進了HY系列超聲波探傷儀所有經過實踐驗證的先進信號處理和實用探傷功能及測量能力;通過LAN以太網接口可實現與計算機的實時通訊,大容量數據庫存儲,高速USB2.0接口和SD存儲卡將詳細的檢測數據輸出到計算機等,可滿足各種挑戰性的探傷應用需求。該儀器用于檢測各種材料內部的缺陷(鋼、不銹鋼、銅、鋁、硬質合金、鑄件、復合材料、和焊縫等等),可有效檢測出氣孔、裂紋、疏松、夾雜、未焊透等缺陷,功能全面實用,是真正的筆記本式數字超聲波探傷儀,廣泛應用在壓力容器制造、金屬鋼結構、船舶制造、機械制造、電力、化工、石油機械、汽車、冶金、高校等行業。 功能特點:90個獨立探傷通道,各通道探傷參數可存儲在SD卡上(也可轉存至電腦PC機上),永久不丟數據;中文觸摸式鍵盤,操作過程亦有中文提示。儀器內存有JB4730、GB11345、DL/T820、ASM/API/Other等標準,DAC曲線自動生成,也可根據實際工件(如焊縫、鍛件、鑄件、管材、板材、車軸、車輪、小徑管等)生成自定義探傷工藝,現場探傷無需攜帶試塊。內置有大平底、平底孔鍛件探傷方法,AVG曲線自動生成,自動計算鍛件探傷靈敏度,可實時顯示缺陷孔徑Φ值。手動、自動校驗探測功能兩種模式;只需找準最高波,可實現探頭自動校準(始偏、K值),亦可測試材料聲速。 三角聲程測量數據和SL值(DAC)、缺陷孔徑Φ值(AVG)實時顯示,聲程數據可用毫米和微秒(聲波傳輸飛行時間)顯示。屏幕凍結定量功能,隨時捕捉波形,包括峰值記憶和包絡波形。儀器具有動態記錄功能,實時記錄探傷波形動態變化,真實還原探傷過程,支持主機和電腦播放,能做到逐幀數據回放打印。報警功能包括進波門、DAC門、AVG門定位聲光報警,門位、門寬和門高可任意調節;另有一路模擬音頻報警信號輸出(可接頭戴式耳機,用于環境噪聲大的場合,也可接駁外置報警裝置);彩色TFT液晶屏顯示動態變化顏色的波形,可以在從明亮、陽光直射到完全黑暗的環境中高對比度地觀察波形。液晶屏快速的響應時間(60Hz刷新率)能夠保證在快速掃查時回波也顯示無遺;確保無漏檢之憾。 擴展軟件功能:焊縫剖面缺陷定位顯示;RF 射頻模式下的回波-回波功能。數據輸出包括一個 USB 接口、一個LAN以太網接口、一個SD卡插槽,存儲器的容量擴充至10萬個波形數據/通道探傷參數(1G SD卡);體積?。ㄍ庑纬叽?20X185X55 mm),重量輕,帶電池僅1.6Kg;使用進口高能鋰離子充電電池,工作時間達5小時。性能指標:120Mhz采樣,60Hz屏幕刷新率,工作頻率范圍0.1-40MHz,顯示屏:6.5〞高亮度、高分辨率彩色TFT液晶顯示屏增益:110dB(0.1、2、6、步距調節,亦可直接輸入增益值)聲程最小顯示范圍0.1-7.5mm(鋼縱波)探測范圍:0.1-8000mm(鋼 縱波)聲速范圍:1m/s~9999m/s(1mm步距調節,亦可直接輸入聲速值)動態范圍:> 36dB垂直線性誤差:< 3 % 水平線性誤差:< 0.1% 噪聲電平:< 8%靈敏度余量:> 62dB(探頭2.5P Φ20,試塊 200mm Φ2平底孔) 脈沖移位:0.0~3000mm 探頭延時:0.00us~50.00us,分辨率0.01us 掃描分辨率:0.1mm (0~100mm);1mm (100~1000mm);10mm (1000~8000mm) 探頭類型:單探頭、雙晶探頭、穿透探頭閘 門:進波門、失波門讀數標準配置:主機:一臺(不含電池)。電源:一套(5000mHA鋰離子電池一塊,充電器一只)。探頭:直探頭2.5P Φ20,一個;斜探頭2.5P 13X13 K2,一個)。探頭線:C9-Q9兩根。讀卡器:一個;SD卡:一個(容量隨機)。文件資料:說明書一份,合格證一張,保修卡一張,裝箱單一份。技術資料:拷貝在SD卡內,含探傷儀電子文檔說明書、常用探傷標準、超聲波探傷常識。探傷數據處理軟件一套。鋁合金專用儀器箱一只 。

        該公司產品分類: 電力測量儀器 水分測定儀系列 光學測量儀器 力學測量儀器 電子秤/電子天平 無損檢測儀器 硬度計 環境氣候試驗箱 實驗室專用儀器 工程測繪器 便攜式測量儀器

        型號:MUT650C庫號:M392084超聲波探傷儀 型號:MUT650C庫號:M392084

        超聲波探傷儀 型號:MUT650C
        庫號:M392084   
               midwest- MUT650C是一款便攜式、全數字式超聲波探傷儀,能夠快速便捷、無損傷、精確地進行工件內部多種缺陷(裂紋、夾雜、氣孔等)的檢測、定位、評估和診斷。既可以用于實驗室,也可以用于工程現場。本儀器能夠廣泛地應用在制造業、鋼鐵冶金業、金屬加工業、化工業等需要缺陷檢測和質量控制的領域,也廣泛應用于航空航天、鐵路交通、鍋爐壓力容器等領域的在役安全檢查與壽命評估。本儀器采用國際的集成電路技術和新型顯示屏,其各項性能指標均達到或超過國際水平。儀器采用人工智能技術,功能強勁,使用方便。·功能特點本儀器專為嚴苛的現場環境而設計,堅固耐用,獨有的密封設計使它能夠抵御從海洋到沙漠各種惡劣環境中的潮濕、風沙、灰塵、油污及其他污染。獨特防潑濺設計,防水防油,可在雨天工作。獨特的360˚可旋轉支架使用方便。缺陷回波參數(距離、水平、垂直、波幅、dB當量值、平底孔當量值)實時顯示,探傷信息一目了然,并可自動完成缺陷定量的平底孔轉換。方波脈沖、發射電壓、濾波頻帶、探頭阻尼可調,適用于各種工件的探傷。全中文顯示,主從式菜單,并設計有快捷按鍵和數碼飛梭旋輪,操作便捷,技術領先。采用TFT全數字真彩色液晶顯示器,屏幕亮度清晰,可根據環境選擇背景色、波形顏色和菜單項顏色,液晶亮度可自由設定,以便可以適應不同操作環境。高性能安保電池模塊便于拆裝,大容量高性能鋰離子電池模塊使儀器連續工作時間延長到八小時以上;儀器輕小便攜,單手即可以把持,經久耐用,引導行業潮流。·主要技術參數 檢 測 范 圍: (0~9999)mm工 作 頻 率: (0.2~20)MHz聲 速 范 圍: (1000~15000)m/s動 態 范 圍: ≥36dB垂直線性誤差: ≤2.5%水平線性誤差: ≤0.1%分 辨 力: >40dB(5P14)靈 敏 度余量: >65dB(深200mmФ2平底孔)數 字 抑 制: (0~80)%,不影響線性與增益電噪聲 電 平: ≤8%探 頭 類 型: 直探頭、斜探頭、雙晶探頭、穿透探頭閘 門: 進波門、失波門;單閘門讀數、雙閘門讀數;峰值觸發、邊沿觸發報 警: 蜂鳴報警,LED燈報警電 源: 直流(DC)9V;鋰電池,可連續工作8小時以上外 型 尺 寸: 280mm×220mm×70mm環 境 溫 度: (-10~50)℃相 對 濕 度: (20~95)%RH注:以上指標是在探頭頻率為2.5MHz、檢波方式為全波的情況下所測得。檢測范圍零界面入射~9999mm(鋼中、縱波),可連續調節發射脈沖脈沖幅度:200V、300V、400V、500V、600V分級選擇,適用探頭范圍廣脈沖寬度:在(0.1~0.5)µs范圍內連續調節,以匹配不同頻率的探頭探頭阻尼:68Ω、100Ω、150Ω、500Ω可選,滿足靈敏度及分辨率的不同工作要求工作方式:直探頭、斜探頭、雙晶探頭、穿透探傷放大接收硬件實時采樣:高分辨率10位AD轉換器,采樣速度320MHz,波形高度保真檢波方式:正半波、負半波、全波、射頻檢波濾波頻帶:根據探頭頻率全自動匹配,無需手動設置。閘門讀數:單閘門和雙閘門讀數方式可選擇;觸發方式可選擇峰值觸發或邊沿觸發。 增益:總增益量110dB,設0dB、0.1dB、2dB、6dB步進值,獨特的全自動增益調節及掃查增益功能,使探傷既快捷又。閘門報警閘門起始、閘門寬度、閘門高度任意可調;B閘門可選擇設置進波報警或失波報警;閘門內蜂鳴聲和LED燈(吵噪環境中LED燈報警非常)報警及關閉。數據存儲100組探傷參數通道,可預先調校好各類探頭和儀器的組合參數并存入探傷參數通道,以方便隨時調用;可自由設置各行業探傷標準;可存儲1000幅探傷回波信號及參數,實現存儲、讀出及通過USB接口傳輸。探傷功能探傷標準:內置各行業常用探傷標準,直接調用,方便、快捷焊縫圖示:可設置焊縫形態參數,探傷中直觀顯示焊縫圖和缺陷在焊縫中的位置自動校準:探頭零點和探頭角度(K值)自動校準功能;聲速自動測量功能波峰記憶:實時檢索缺陷波,記錄缺陷最大值Φ值計算:直探頭鍛件探傷找準缺陷波后自動計算、顯示缺陷當量尺寸缺陷定位:實時顯示缺陷水平、深度(垂直)、聲程位置缺陷定量:缺陷當量dB值實時顯示缺陷定性:通過回波包絡波形,方便人工經驗判斷曲面修正:用于曲面工件探傷,可實時顯示缺陷周向位置(可選功能)DAC/AVG:曲線自動生成,取樣點不受限制,并可進行補償與修正。曲線隨增益自動浮動、隨聲程自動擴展、隨延時自動移動。能顯示任意孔徑的AVG曲線AWS D1.1: 美國焊接學會標準,為各類AWS焊縫檢測應用提供一個動態反射體“缺 陷定級”。可避免手工計算,提高檢測效率(可選功能)裂紋測高:利用端點衍射波自動測量、計算裂紋高度(可選功能)門內展寬:放大回波細節,便于回波分析連續記錄:實時記錄波形,存儲、回放波形凍結:凍結屏幕上顯示的波形,便于缺陷分析回波編碼:以不同顏色顯示1~6次回波顯示區,便于判斷缺陷位置B型掃描:實時掃查、橫截面顯示,可顯示工件缺陷形狀,使探測結果更直觀。實時時鐘實時探傷日期、時間的跟蹤記錄,并記錄存儲。通訊接口USB2.0高速通訊傳輸接口電池模塊高容量鋰電池模塊,在線充電,方便探傷人員使用。服務本公司所有產品兩年內全免費維修,終身保修,易損易耗件價格合理!
        該公司產品分類: 分析儀

        TUD200超聲波探傷儀

        產品簡介:

          TUD200 超聲波探傷儀是一種便攜式工業無損探傷儀器,它能夠快速便捷、無損傷、精確地進行工件內部多種缺陷(焊縫、裂紋、夾雜、氣孔等)的檢測、定位、評估和診斷。既可以用于實驗室,也可以用于工程現場。廣泛應用在鍋爐、壓力容器、航天、航空、電力、石油、化工、海洋石油、管道、軍工、船舶制造、汽車、機械制造、冶金、金屬加工業、鋼結構、鐵路交通、核能電力、高校等行業。

        主要特點:

        TUD200 超聲波探傷儀技術指標  ·測量范圍(mm): 2.5~9999(鋼縱波)  ·工作頻率(MHz): 0.2~10(低頻0.2~1,中頻0.6~4,高頻1~10三檔可選)  ·增益調節:   110dB (0.2、0.5、1、2、6、12步距調節,0.0時鎖定)  ·垂直線性誤差: ≤3%  ·動態范圍:   ≥32dB  ·水平線性誤差: ≤0.2%  ·波形顯示:   正半波、負半波、全波和射頻  ·探傷靈敏度余量: > 50dB(2.5P20/200Ф2)  ·脈沖移位:  ?。?0~+3400 us  ·探頭延時:   0us~99.99us,分辨率0.01  ·掃描分辨率:  0.1mm (5~100mm);1mm (100 ~1000mm) ;           10mm (1000~9999mm)  ·聲速:     1000 m/s~9999m/s  ·外形尺寸(mm): 230×184×53  ·重量 (含電池): 1.4 KgTUD200 超聲波探傷儀功能特點  ·具有存儲功能,可以存儲100幅A掃圖形及參數和100組共10000個厚度值;  ·具有雙閘門設置和報警功能。能夠在屏幕上任意設置閘門的位置和寬度,有進波、失波和自動三種報警方式;  ·可以在單探頭和雙探頭兩種探傷工作方式之間任意切換;  ·探頭阻尼通過菜單選擇在50、150、400之間切換;  ·可以利用標準試塊手動或自動生成DAC曲線;  ·具有線性抑制功能,屏高的0~80%,步距:1%;  ·具有波形和探傷參數的凍結和解凍功能;  ·具有系統參數的加鎖/解鎖功能;  ·具有存儲圖形的回放功能,將已存儲的A掃圖形從存儲區取出并顯示在屏幕上;  ·具有刪除功能,將指定的內容(以存儲組號表示)從存儲區刪除;  ·具有打印功能,通過串行打印機打印厚度報告與波幅曲線;  ·可以進行屏幕硬拷貝,將當前屏幕上的圖形和菜單拷貝并打印;  ·具有雙向RS232串口,即可將數據文件傳輸至PC機,也可用PC機下載數據至探傷設置參數,進行數據處理、保存、生成探傷報告等;  ·聲程測量;  ·顯示方式:EL高亮度圖形點陣顯示。標準配置  1.主機1個  2.鎳氫電池2組  3. 4A/12V電源適配器1個  4.電源電纜1根  5.LEMO探頭連電纜2根  6.直探頭1支  7.斜探頭1支選配件  1.行式熱敏打印機(TPUP-NH)  2.串行通訊電纜  3.PC通訊軟件

        TUD201超聲波探傷儀

        產品說明:概述  本儀器是一種便攜式工業無損探傷儀器,它能夠快速便捷、無損傷、精確地進行工件內部多種缺陷(焊縫、裂紋、夾雜、氣孔等)的檢測、定位、評估和診斷。既可以用于實驗室,也可以用于工程現場。廣泛應用在鍋爐、壓力容器、航天、航空、電力、石油、化工、海洋石油、管道、軍工、船舶制造、汽車、機械制造、冶金、金屬加工業、鋼結構、鐵路交通、核能電力、高校等行業。技術指標  ·測量范圍(mm): 2.5~9999(鋼縱波)  ·工作頻率(MHz): 0.2~10(低頻0.2~1,中頻0.6~4,高頻1~10三檔可選)  ·增益調節:   110dB (0.2、0.5、1、2、6、12步距調節,0.0時鎖定)  ·垂直線性誤差: ≤3%  ·動態范圍:   ≥32dB  ·水平線性誤差: ≤0.2%  ·波形顯示:   正半波、負半波、全波和射頻  ·探傷靈敏度余量: > 50dB(2.5P20/200Ф2)  ·脈沖移位:    -20~+3400 us  ·探頭延時:    0us~99.99us,分辨率0.01  ·掃描分辨率:   0.1mm (5~100mm);1mm (100~1000mm) ;            10mm (1000 ~9999mm)  ·聲速:      1000 m/s~9999m/s  ·外形尺寸(mm):  230×184×53  ·重量 (含電池):  1.4 Kg功能特點  ·具有存儲功能,可以存儲100幅A掃圖形及參數和100組共10000個厚度值;  ·具有雙閘門設置和報警功能。能夠在屏幕上任意設置閘門的位置和寬度,有進波、 失波和自動三種報警方式;  ·可以在單探頭和雙探頭兩種探傷工作方式之間任意切換;  ·探頭阻尼通過菜單選擇在50、150、400之間切換;  ·可以利用標準試塊手動或自動生成DAC曲線;  ·具有線性抑制功能,屏高的0~80%,步距:1%;  ·具有波形和探傷參數的凍結和解凍功能;  ·具有系統參數的加鎖/解鎖功能;  ·具有存儲圖形的回放功能,將已存儲的A掃圖形從存儲區取出并顯示在屏幕上;  ·具有刪除功能,將指定的內容(以存儲組號表示)從存儲區刪除;  ·具有打印功能,通過串行打印機打印厚度報告與波幅曲線;  ·可以進行屏幕硬拷貝,將當前屏幕上的圖形和菜單拷貝并打印;  ·具有雙向RS232串口,即可將數據文件傳輸至PC機,也可用PC機下載數據至探傷設置參數,進行數據處理、保存、生成探傷報告等;  ·聲程測量;  ·顯示方式:EL高亮度圖形點陣顯示。

        Phasor系列Phasor系列超聲波探傷儀-美國GE

        我公司為GE檢測科技華南授權經銷商,歡迎來電咨詢!公司網址:www.sztmp.com 

        Phasor系列超聲波探傷儀提供4款不同型號,具有可升級的特點和優勢。Phasor CV是編碼兼容的傳統超聲波探傷儀,可升級為Phasor 16/16 Weld或16/64 Phasor XS。可通過快速簡便的軟件升級至相控陣Phasor 16/16 Weld或相控陣Phasor XS.無需更換主基板硬件,利用相同的簡單菜單驅動的界面作為Phasor CV模型,不需要培訓。與相控陣傳感器相結合,兩個平臺都可以在更短的時間內,以合理的價格解決您最苛刻的檢測應用要求。

        Phasor 16/16 Weld和Phasor XS可以迅速切換到常規UT,這樣檢測員可以使用任何標準的傳感器,評估檢測到的缺陷(定位和尺寸)是否符合指定標準或測試規范的要求。

        Phasor CV/DM集相控陣成像設備和傳統的探傷儀于一體,具有相控陣探頭,可以顯著提高腐蝕檢測數據的性。

        特色:

         

        改進的檢測生產率

        下載

         

         
        接受軟件條款 close
         
        NOTICE – READ THIS  CAREFULLY: THIS IS A LEGAL AND BINDING  AGREEMENT BETWEEN YOU AND LICENSOR. BY INSTALLING THE SOFTWARE, YOU AGREE TO  ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE (“LICENSE”). IF YOU DO  NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD OR INSTALL THE SOFTWARE. 1. Definitions Unless otherwise agreed to by Licensor, the following terms shall mean: “Documentation” means all material, including all printed material and on-line or electronic documentation (excluding training materials), referencing the Software and Third-Party Software provided hereunder. “Software” means Licensor’s proprietary computer software and software security devices provided by Licensor under this License. “Third-Party Software” means any proprietary computer software owned by a third party that Licensor may provide to you hereunder. 2. License Grant 2.1 Subject to the terms of this License, Licensor hereby grants to you a non-transferrable and nonexclusive license to use the Software and Documentation, including upgraded, modified or enhanced versions provided by Licensor and to use the Third-Party Software, all for your internal business purposes only 2.2 You have no right to (i) lease, rent, transfer, distribute, sublicense, timeshare or allow third parties to access the Software, Documentation or Third-Party Software, nor assign any rights hereunder to a third party without Licensor’s prior, written agreement; (ii) disassemble, decompile, reverse engineer or otherwise attempt to reconstruct or discover the source code of the Software or Third-Party Software; (iii) pledge the Software or Third-Party Software as collateral or otherwise or encumber such Software or Third-Party Software with any lien or security interest; or (iv) remove any product identification, copyright, trademark or other notice from the Software, Documentation or Third-Party Software. If you  believe that you are entitled to reverse engineer the Software as a matter of local law (e.g., the Council Directive of May 14, 1991, of the Council of the European Communities, as amended), you agree that you shall first request technical information from Licensor. You shall use any technical information delivered by Licensor only for purposes of ensuring “interoperability” and compatibility and shall treat such technical information as Proprietary Information (defined below). Any reverse engineering of the Software shall void any warranties or indemnification obligations of Licensor and shall automatically release Licensor from any obligation to provide support services under this or any separate agreement. 2.3  Certain software Licensor provides to you may contain Third-Party Software, including but not limited to “open source” software. Use of the Third-Party Software and its source code may be governed by separate copyright notices and license provisions, which may be found or identified in the Documentation or on the media delivered with the Software and which are incorporated by reference into this License. You shall not modify or combine the Software and/or any Third-Party Software in any manner that could cause, or could be interpreted or asserted to cause, the Software or any modifications thereto to become subject to the terms of any license applicable to Third Party Software. 2.4  Unless otherwise agreed to by Licensor or specified on your accepted Purchase Order, you shall only have the right to install and use a single copy of the Software and Third-Party Software on a single computer workstation for use by a single user, which may be referred to as a “CPU License.” If “Local Area Network License” rights were purchased, you are authorized to install and use by the designated maximum number of concurrent users on any number of I/O access stations for a designated Local Area Network (LAN). LAN is defined as a hard-wired computer network system which inter-connects computers within a building, facility or site. A facility or site is defined as a production factory or plant producing a product or multiple products at a single location. Concurrent users are defined as your employees logged onto the software application at the same time regardless of activity. Use over a Wide Area Network (WAN) is strictly prohibited, except as may be provided by separate agreement resulting from special license negotiations. WAN is defined as any computer network system that inter-connects one or more computers within a building, facility or site to one or more computers residing outside the same building, facility or site. 2.5 You may make one (1) copy of the Software, Documentation and Third-Party Software for backup purposes only. You must reproduce and include all proprietary rights and copyright notices on any backup copies. Except as authorized under this License, no copies of the Software, Documentation or Third-Party Software may be made by you or any third party; provided, however, you may print online Software documentation for its own internal use, provided the maximum number of copies may not exceed the number of users  licensed hereunder. 3. Support Services; Upgrades This License does not obligate Licensor to provide maintenance and support on any  Software or Third-Party Software licensed hereunder. Support services are available under separate agreement. If the Software is an upgrade of a previous version (provided such upgrade was obtained under a separate support services agreement with Licensor or a Licensor authorized distributor), you may use the upgraded Software only in accordance with this License. Licensor will use commercially reasonable attempts to answer your technical support requests concerning the Software during Licensor’s normal business hours; however, this service is offered as a convenience to you, and Licensor may not be able to resolve every support request. For technical support requests, you may contact Licensor, as indicated in the Documentation or Help section of the Software. Licensor reserves the right to charge for customer support services, provided you receives advance notice of all applicable charges. IN NO EVENT WILL GE OR ITS SUPPLIERS BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT, CONSEQUENTIAL, PUNITIVE OR SIMILAR DAMAGES OF ANY KIND RESULTING FROM THE DELIVERY OR NON-DELIVERY OF TECHNICAL SUPPORT SERVICES OF ANY  KIND. THIS INCLUDES, BUT IS NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, DAMAGE TO ANY PARTY\\\\\\\\'S COMPUTER OR OTHER EQUIPMENT AND THE LOSS OF ANY DATA. 4. Verification During the term of this License and for 3 years thereafter, Licensor may upon reasonable notice require that an independent audit of the use of the Software and Third-Party Software be conducted during your normal business hours. Upon such notice, you shall provide Licensor’s independent auditor site access and  the right to inspect relevant portions of your computer system on which the Software and Third-Party Software resides. 5. Term and Termination 5.1 The Software, Documentation and Third-Party Software shall be considered accepted by you upon receipt. 5.2 This License is effective until terminated. Licensor may terminate this License immediately if you fail to comply with any of the terms and conditions herein. Upon termination, you shall (a) cease using the Software, Documentation and Third-Party Software and (b) certify to Licensor within one (1) month of termination that you have destroyed or returned to Licensor the Software, Documentation and Third-Party Software, and all copies thereof. 6. Ownership 6.1 All Software, Documentation and Third-Party Software are licensed and not sold. You agree that Licensor and its suppliers own all proprietary rights, including, but not limited to any patent, copyright, trade secret, trademark and other proprietary rights in and to the Software, Documentation and Third-Party Software, including any Derivative  Works thereof, and any corrections, bug fixes and updates to such Software, Documentation, Third-Party Software or Derivative Works. For purposes hereof, “Derivative Works” shall mean (i) any work that is based upon one or more pre-existing works, such as a revision, enhancement, modification, translation, abridgement, condensation, expansion, extension or any other form in which such pre-existing works may be recast, transformed or adapted, and that, if prepared without the authorization of the owner of the copyright to such pre-existing works would constitute a copyright infringement and (ii) any compilation that incorporates such a pre-existing work. You shall have only a “right to use” license to any Derivative Works in accordance with the terms of this License. 6.2 For the purposes of this Article, the term “Licensor” shall mean Licensor, its  affiliates and their successors or assigns. 7. Limited Warranties 7.1 Licensor warrants, for your benefit alone, that under normal use the media in which the Software is embedded shall be free from defects in material and  workmanship, for a period of one (1) year from the date of delivery of the initial Software (“Warranty Period”). 7.2 Licensor warrants, for your benefit alone, that during the Warranty Period, the  Software will perform substantially in accordance with its Documentation. If, during the Warranty Period, an Error occurs (where “Error” is defined as a problem caused by an incorrect operation of the unmodified computer code in the Software or an incorrect statement or diagram in the Documentation that produces incorrect results), Licensor will use commercially reasonable efforts to correct such Error, provided you furnish Licensor with the following: (a) written notice of the warranty claim,  including a description of the failure to perform in accordance with the Documentation and a specific description of the operating conditions (including the specific software/hardware configuration) under which the failure occurred and (b) to the extent feasible, a representative sample of inputs for repeating and analysing the failure. If Licensor is unable, after commercially reasonable efforts, to correct the Error, your sole remedy shall be termination of this License and a refund of the license fees allocable to the specific nonconforming Software that have been paid by you to Licensor hereunder. 7.3 This Article sets forth the exclusive remedies for all claims based on failure of or defect in the Software and Documentation, whether the failure or defect arises before or during the Warranty Period and whether a claim, however instituted, is based on contract, indemnity, warranty, tort (including negligence) or civil liability, strict liability or otherwise. The warranties provided herein are  exclusive and are in lieu of all other warranties and guarantees whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Without limiting the foregoing, Licensor does not warrant that the Software or Documentation (or YOUR use thereof) will be free from all errors or its use will be uninterrupted. 7.4 Any remedial steps taken by Licensor hereunder shall not extend the applicable Warranty Period. 7.5 Except as expressly authorized by Licensor in writing, all Third-Party Software shall carry only the warranties provided by the owners thereof and Licensor gives no warranties for such Third-Party Software. 8. Proprietary Information; Equitable Relief 8.1 All information concerning or embedded in the Software (including but not limited to source code and training materials), Documentation and Third-Party Software is confidential and shall be considered Licensor’s (or its suppliers’) proprietary information (“Proprietary Information”) whether or not the information is marked as Proprietary Information. The Proprietary Information includes commercially valuable, substantial trade secrets, the design and development of which reflect the effort of skilled development experts and investment of considerable amounts of time and money. 8.2 You acknowledge: (a) any use of the Software, Documentation or Third-Party Software in a manner inconsistent with this License or (b) any other misuse of the Proprietary Information of Licensor (or its suppliers), will cause immediate irreparable harm to Licensor (or its suppliers) for which there is no adequate remedy at law. You agree that Licensor (or its suppliers) shall be entitled to immediate and permanent injunctive relief from a court of competent jurisdiction in the event of any such misuse or threatened misuse by you. The parties agree and stipulate that Licensor shall be entitled to such injunctive relief without posting of a bond or other security; provided, however, that if the posting of a bond is a prerequisite to obtaining injunctive relief, then a bond in an amount equivalent to U.S. $1,000 shall be sufficient. Nothing contained herein shall limit Licensor’s right to any remedies at law, including the recovery of damages from you for breach of this License. 9. Compliance With Laws You understand and recognize that the Software, Documentation and Third-Party Software made available to you hereunder are subject to all applicable trade control laws and regulations. You hereby agree that you will not tranship, re-export, divert or direct the Software, Documentation or Third-Party Software, other than in and to the ultimate country of destination specified on your order or declared as the country of ultimate destination on Licensor’s invoice, except as permitted by applicable laws and regulations. 10. Limitation  of Liability 10.1 The total liability of Licensor, on all claims of any kind (excluding claims for death or bodily injury), whether in contract, warranty, indemnity, tort/extracontractual liability (including negligence), strict liability or otherwise, arising out of the performance or breach of this License or use of any Software, Documentation and Third-Party Software, shall not exceed the price of the specific Software, Documentation or Third-Party Software giving rise to the claim. All Licensor’s liability under this License shall terminate upon the expiration of the Warranty Period, provided that you may enforce a claim of such liability accruing during the Warranty Period by an action timely commenced in accordance with the applicable statute of limitations or statute of repose, but in no event greater than one (1) year after the expiration of such Warranty Period. 10.2 In no event, whether as a result of breach of contract, warranty,  tort/extracontractual liability (including negligence), strict liability, indemnity or otherwise, shall Licensor be liable for loss of profits or revenues, loss of use of the Software, Documentation or Third-Party Software or any associated equipment, interruption of business, cost of capital, cost of cover, downtime costs, claims of your customers for such damages or for any special, consequential, incidental, indirect, punitive or exemplary damages. 10.3 If Licensor furnishes you with advice or assistance that is not required under this License, the furnishing of such advice or assistance will not subject Licensor to any liability, whether in contract, indemnity, warranty, tort (including negligence), strict liability or otherwise. 10.4 For the purposes of this Section 10, the term “Licensor” shall mean Licensor, its affiliates, subcontractors and suppliers of any tier and their respective agents and employees, whether individually or collectively. 11. Dispute Resolution, Governing Law 11.1 If you have your pertinent place of business in a country other than the U.S.,  Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the Philippines, any dispute arising out of or in connection with this License, including any question regarding its existence, validity or termination, shall be referred to and finally resolved by arbitration under the London Court of International Arbitration (“LCIA”) Rules, which Rules are deemed to be incorporated by reference into this clause. The number of arbitrators shall be one unless the amount in dispute exceeds the equivalent of $1,000,000, in which event it shall be three. When three arbitrators are involved, each party shall appoint one arbitrator, and those two shall appoint the third, who shall be the Chairma. None of the arbitrators may be a national or resident of the countries in which either party is organized or has its principal place of business. The seat, or legal place, of arbitration shall be London, England. The arbitration shall be conducted in the English language. In reaching their decision, the arbitrators shall give full force and effect to the intent of the parties as expressed in this License, and if a solution is not found herein, shall apply the governing law of this License. The decision of the arbitrator shall be final and binding upon both parties, and neither party shall seek recourse to a law court or other authority to appeal for revisions of such decision. 11.2 If you have your pertinent place of business in the U.S., Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the  Philippines, any dispute arising out of or in connection with this License, shall be brought in the U.S. District Court for the Northern District of New York, or in the event that court lacks jurisdiction to hear the claim, in the appropriate state courts of Onondaga County, New York, and the parties irrevocably consent to the exclusive jurisdiction of such courts in respect of all such claims. Each party hereby submits to and accepts generally and unconditionally the jurisdiction of those courts with respect to its respective person and property, and irrevocably consents to the service of process in connection with any such action or proceeding by personal delivery to the party or by the mailing thereof by registered or certified mail, postage prepaid to the other party at the address for the party. 11.3 The validity, performance and all matters relating to the interpretation and effect of this License and all further documents executed pursuant to it shall be construed and interpreted in accordance with the laws of (i) the State of  New York, U.S., if you have your pertinent place of business in the U.S. or (ii) England and Wales if you have your pertinent place of business outside of the U.S., excluding its rules on the conflict or choice of laws. If you have your pertinent place of business outside of the U.S., the United Nations Convention on Contracts for the International Sale of Goods shall not apply. 12. Patent Indemnification 12.1 Subject to the terms of this License, Licensor shall indemnify you against any damages, costs and expenses arising out of any suit, claim or proceeding (a “Claim”) alleging that the Software or Documentation infringes a patent in effect in the U.S., an EU member state or country of delivery (provided there is a corresponding patent issued by the U.S. or an EU member state) or U.S. copyright or copyright registered in the country of delivery; provided that: (a) you promptly notify Licensor in writing of any such Claim; (b) you make no admission of liability and gives Licensor sole authority, at Licensor’s expense, to direct and control all defense, settlement and compromise negotiations; and (c) you provide Licensor with full disclosure and assistance that may be reasonably required to defend any such Claim. 12.2 Licensor shall  have no obligation or liability with respect to any Claim based upon: (a) any Software or Documentation that has been altered, modified or revised; (b) the combination, operation or use of any Software or Documentation with other products when such combination is part of any allegedly infringing process; (c) failure of you to implement any update provided by Licensor that would have prevented the Claim; or (d) unauthorized use of Software or Documentation, including, without limitation, a breach of the provisions of this License. 12.3 Should any Software or Documentation or any portion thereof, become the subject of a Claim, Licensor may at its option (a) procure for you the right to continue using the Software or Documentation or portion thereof, (b) modify or replace it in whole or in part to make it non-infringing or (c) failing (a) or (b), take back the Software or Documentation and refund any fees received by Licensor attributable to the infringing Software or Documentation. 12.4 This states Licensor’s entire liability for indemnification for patent, trademark, copyright and trade secret infringement for the Software or Documentation. 12.5 Notwithstanding the foregoing, with respect to any Third-Party Software or portions thereof, only the indemnity of the manufacturer/developer, if any, shall apply. 13. General Clauses 13.1 Software and Third-Party Software licensed hereunder are not intended for use in connection with any nuclear facility or activity without the written consent of Licensor. You warrant that you shall not use or permit others to use Software or Third-Party Software for such purposes, unless Licensor agrees to such use in writing. If, in breach of the foregoing, any such use occurs, Licensor disclaims all liability for any nuclear or other damages, injury or ontamination and in addition to any other legal or equitable rights of Licensor, you shall indemnify and hold Licensor harmless against any such liability. If Licensor agrees in writing to any such nuclear use, Licensor’s special terms and conditions for nuclear applications and protections against nuclear liability shall be attached and incorporated fully herein by reference. 13.2 Licensor may assign or novate its rights and obligations under this License, in part or in whole, to any entity directly or indirectly controlling, controlled by or under common control with Licensor without your consent. You agree to execute such documents as may be necessary to effect the assignment or novation. The delegation or assignment by you of any or all of your duties or rights under this License without Licensor’s prior written consent shall be void. 13.3 If any provision of this License is found to be void or unenforceable the remainder of this License shall not be affected and the parties hereby agree that they will replace any such void or unenforceable provision with a new provision that achieves substantially the same practical or economic effect and which is valid and enforceable. 13.4 This License represents the entire agreement between the parties, and no  modification, amendment or waiver shall be binding on either party unless agreed in writing by the parties’ authorized representatives. 13.5 For direct and indirect U.S. government contracts only, all Software,  Documentation and Third-Party Software provided hereunder shall be considered “commercial items” as defined in FAR Part 2, 2.101 and in accordance with FAR 52.244-6. If the reasonableness of the price cannot be established, if cost or pricing data is required for any other reason, or if the Software,  Documentation or Third-Party Software cannot be considered “commercial items,” Licensor may withdraw the proposal or cancel this License without penalty or other liability. 13.6 Upon request you agree to provide Licensor with a signed copy of this License.
         
        page-loader
          close
         
         
         
         
        說明 中文 English Français Deutsch 日本語 Português RU Español
        Corrosion Erosion Brochure   acrobat-reader         acrobat-reader  
        Inspection Technologies Brochure   acrobat-reader   acrobat-reader     acrobat-reader acrobat-reader
        Phasor CV Brochure   acrobat-reader acrobat-reader acrobat-reader   acrobat-reader   acrobat-reader
        Phasor CV/DM Brochure   acrobat-reader         acrobat-reader  
        Phasor PDI Kit Brochure   acrobat-reader            
        Phasor Series   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
        Phasor Series Brochure             acrobat-reader  
        Phasor Series Operating Manual   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
        Phasor Series Overview Flyer   acrobat-reader         acrobat-reader  
        Phasor Series Quick Start acrobat-reader acrobat-reader acrobat-reader acrobat-reader        
        Phasor XS Data Sheet acrobat-reader acrobat-reader acrobat-reader acrobat-reader acrobat-reader     acrobat-reader
        按此下載 Phasor XS Ultrasonic Portable Flaw Detector Software Update

        美國GE/德國KK超聲波探傷儀

        特級代理:美國GE/德國KK 超聲波探傷儀 歡迎訂購!
        1.         Phasor XS便攜式相控陣超聲波探傷儀
        2.         USM Vision超聲焊縫檢測探傷儀
        3.         USM35X 支柱瓷絕緣子及瓷套專用超聲波探傷儀
        4.         USM35XS 超聲波探傷儀
        5.         USM GO Advanced型超聲波探傷儀
        6.         USM GO DAC超聲波探傷儀
        7.         USM GO AWS超聲波探傷儀
        8.         USM GO Basic超聲波探傷
        9.         USM35XDAC 超聲波探傷儀
        10.     USN58L/R 超聲波探傷儀
        11.     USN60 超聲波探傷儀

        檢測范圍 聲速范圍 顯示延遲 探頭延遲 阻尼 測試模式 脈沖發生器 脈沖電壓(方波脈沖模式) 脈沖寬度(方波脈沖模式) 脈沖能量(方波脈沖模式) 脈沖重復頻率 增益 頻率范圍 閘門監視器 聲程測量 整流 抑制 單位 輸出 顯示屏 A掃描尺寸 A掃描刷新頻率 數據存儲 厚度值存儲 語言 探頭連接 鍵盤 電源 工作溫度 存儲溫度 尺寸和重量

        1~27940mm(鐵)連續可調或在預置范圍內可調 250~16000m/s,連續可調,1m/s步進,65種材料聲速可選 -20~3498us 0~999.9us 50、75、150、1000Ω 脈沖回波法,雙晶法和穿透法 方波脈沖 50~450v,步進為10v 50~1000ns,步進為10ns 低、高 15~6000Hz,自動低、自動高和手動調節 110dB,以0.1/0.5/1/2/6dB為單位分級調節;用戶可自己定義,可鎖定 0.25~25MHz,有10種設置可供選擇 兩個獨立的閘門 始波至回波,可選擇前沿或峰值多回波 RF/全波/正/負半波整流 0~80%,線性 公英制可選 TTL報警信號/模擬輸出/RS232輸出 98x113mm,640x480象素VGA,4種顏色可選,8種A掃描顏色可選,帶背光,可調節明暗度 標準440x401象素,或440x201象素 60Hz 最少200組數據,包括儀器的操作參數和A掃描,可保存2年 最多99999個厚度值 德語、英語、法語、意大利語、葡萄牙語、西班牙語、丹麥語、瑞典語、挪威語、芬蘭語、荷蘭語、羅馬尼亞、捷克、斯洛文尼亞 Lemo或BNC接口 國際標準鍵盤 6個NiMH(9Ah)電池,可工作6小時 0~55℃ -25~70℃(不帶電池) 282x150x159mm,3kg
         
        該公司產品分類: 轉速表 測振儀

        最新產品

        熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
        日本性爱一二三区,色综合伊人丁香五月婷婷综合缴情,国产普通话刺激视频,伊人久久综合热线大杳蕉
        1. <li id="9pzss"><meter id="9pzss"></meter></li>
          <thead id="9pzss"></thead>

          1. <thead id="9pzss"></thead>